← Guides

Countertop edge profiles and finishes explained: eased to ogee, polished to leathered

Short answer: the edge profile is the shape of the counter's front edge. Eased (nearly square, softened) is the simplest and most common. Bevel and bullnose are next, and ogee and dupont are the decorative options. The finish is the surface: polished is glossy, honed is matte, and leathered is textured with a soft sheen. Choose both from real samples, and confirm with your fabricator what your stone and thickness allow, and what each costs.

Fabricators and showrooms can use this page with a buyer or send it to one. Sources were checked on 2026-11-12.

Edge profiles

The common edges

Edge What it looks like Often suits
Eased Square with the sharp corner softened Modern, and most kitchens
Bevel A diagonal cut along the top corner Modern
Half bullnose The top corner rounded, the bottom square Traditional or transitional
Full bullnose Top and bottom rounded into a curve Softer, traditional
Ogee An S-shaped curve Traditional
Dupont A step down, then a curve Traditional

Cambria calls the eased edge "the simplest and most popular edge profile" and describes the bevel as "a diagonal cut along the top of the countertop." On style, it says "ornate edges like ogee or half bullnose suit traditional spaces," while "eased, bevel, or straight edges complement modern designs" (Cambria).

Descriptions here are general, and names vary between fabricators and brands. MSI's edge visualizer, for example, lists 13 profiles, including double radius, triple pencil and dupont bullnose (MSI). So point at a drawing or a sample, not just a name.

What the edge changes, and what it doesn't

  • Performance: Cambria says "edge profiles do not affect the overall performance of Cambria countertops." For other materials, ask your fabricator.
  • Thickness: Cambria says "some intricate or elaborate edge profiles require a certain thickness to be properly fabricated." On thinner stone, ask whether the profile you want is possible and how the fabricator would make it.
  • Cost: some fabricators include standard edges and charge more for decorative ones. Ask for the edge as a line on the quote.
  • Daily life: a softer, rounded edge is gentler to bump into. A detailed profile like ogee has more curves to wipe.
  • Seats and sinks: think about where people lean, at an island overhang, and how the edge meets an undermount sink.

MSI's own note is good advice for any edge tool: "Please confirm your edge preference with your countertop fabricator, to ensure compatibility."

Finishes

The three main finishes

Finish Look and feel Living with it
Polished Glossy and reflective, deepens the color The most common. Etching shows more on polished marble
Honed Smooth, matte, no shine Fingerprints and grease show more. May need sealing more often
Leathered Soft sheen, textured, small ridges Hides fingerprints and crumbs well. Less likely to show scratches

What the sources say

Polished. An NSI article says "polished countertops are the norm in the United States," in a designer's words (NSI). MSI says polished granite "doesn't require resealing as often because the surface isn't as porous when compared to other finishes" (MSI, updated September 2026).

Honed. "Honed is the original matte-type surface," says the same NSI article, and the designer quoted there loves it for kitchen countertops. MSI warns that "fingerprints, grease, and dust are much more visible on a honed surface," and that honed granite needs resealing more often.

Leathered. An article on NSI's consumer site explains that a leathered finish "is executed by honing stone and then texturing it by using diamond-tipped brushes." It says leathered and brushed finishes "are less likely to show scratches that come from normal wear-and-tear" (NSI). MSI says it "does a good job at hiding fingerprints, smudges, water spots, and even crumbs."

Staining. The same textured-surfaces article puts the three in order: leathered stones "are more stain resistant than stones with a honed finish" but "less stain resistant than polished stones." It adds that "a good sealer can help maintain your stone's resistance to staining."

Marble. NSI's marble care article says "you may notice etching more on polished marble than honed or textured" (NSI). Etching is the dull mark acids leave on marble. See marble vs quartzite.

Can the finish be changed?

Often, for natural stone. The textured-surfaces article says the quarry first decides the finish, but that it "can easily be changed to fit your design aesthetic by a fabricator prior to installation." Engineered quartz finishes are set by the maker, so check which finishes each color comes in.

Helping a buyer choose

  1. Choose the color first. The edge and finish are details on top of that choice.
  2. Ask how they use the kitchen. A busy family kitchen may suit a leathered finish and a softer edge. A buyer who wants the color to look its deepest may prefer polished.
  3. Show real samples of each finish in the same stone if you can, and a sample edge. Look at them in the buyer's own light, and run a hand across them.
  4. Match the style. Use Cambria's rule of thumb: eased and bevel for modern, ogee and bullnose for traditional.
  5. Check what's possible and what it costs. The stone, the thickness and the fabricator decide what's available.
  6. Write it down before the template appointment, where the fabricator records the edge details.

Where Countertop Visualizer fits

Countertop Visualizer helps with the first step, choosing the color, on a photo of the buyer's kitchen. Settle the edge and finish with samples and your fabricator.

  • Your catalog: paste your website URL, and the tool pulls in your logo, colors and slab catalog, and you confirm them.
  • The buyer's kitchen: photograph it, tap a slab, and see it on their counters in about 20 seconds. Then tap the next one.
  • Send the image: download it and attach it to a text or email, or share it from your phone if it allows that. Every image carries a small "AI visualization" label, plus your name if you add it.
  • Price: 7 days free, then $250/month. A card is required at signup.

The picture is close enough to choose from, not to sign off on. It doesn't replace samples or the slab.

Try the demo

FAQ

What is the most popular countertop edge profile?

The eased edge. Cambria calls it the simplest and most popular edge profile. It's a nearly square edge with the sharp corner softened.

Does the edge profile affect how the countertop performs?

Cambria says edge profiles do not affect the overall performance of its countertops. The thickness can limit which profiles are available, since some intricate profiles need a certain thickness. Check with your fabricator, including on price, since some profiles can cost more.

What's the difference between polished, honed and leathered?

Polished is glossy and reflective. Honed is smooth and matte. Leathered is honed and then textured with diamond-tipped brushes, giving a soft sheen with small ridges. A fabricator can often change a slab's finish before installation.

Which finish hides fingerprints best?

MSI says a leathered finish does a good job of hiding fingerprints, smudges, water spots and crumbs, and that fingerprints, grease and dust are much more visible on a honed surface. Look at samples in your own kitchen light.

Does a honed finish stain more easily?

It can need more care. An article on the Natural Stone Institute's consumer site says leathered stones are more stain resistant than honed ones, but less than polished ones. MSI says honed granite will need resealing more often. Ask about sealing for the stone you choose.

Sources checked 2026-11-12. Edge names, availability and prices vary by fabricator and brand. Product and company names belong to their owners. Their mention here doesn't imply any relationship with Countertop Visualizer.